Bally-refrigerated-boxes SmartVapElectronically Controlled System Uživatelský manuál stáhnout pdf

SmartVap

Electronically

Controlled System

Model: (Part # 1090200)

Electrical Power: 115/1/60, 208-230/1/60

1079817

PROGRAM SPECIFICATIONS

AND OPERATING

INSTRUCTIONS

Factory Settings:

This Defrost/Temperature control has been

COMPLETELY pre-set at the factory for Electric

Defrost mode. Room temperature default

factory setting is –10ºF. Simply re-adjust if

different room temperature setting is required.

If desired, clock can be set to display the

current time (24 hour mode)

. It is recommended

to retain all other factory settings initially, and

re-adjust accordingly later, if required.

Also refer to control wiring diagrams on

following pages.

Note: After power - up, allow 15 seconds for

display to activate

“Time” Button Functions

To view TIME settings (in sequence listed below),

push and release the “Time” button

To adjust settings, hold down the “Time” button

while pushing “Up” or “Down” buttons.

Electronic Room Thermostat & Defrost Control

Electric Defrost Mode Program

Default DISPLAY shows actual room (zone)

temperature:

Display Adjustment Factory

Function Shows: Range: Default

Setting:

24 hour time

“24:00”

00:00 to

of day

24:00

Number of

defrosts per “nd / 04” nd01 to 12 nd / 04

day (24 hrs)

First defrost “def 01 / 00:00 to

09:00

start time 09:00” 24:00

Maximum

“defd / 35”

1 min. to

35 min.

defrost duration 2 hours

NATIONAL

REFRIGERATION

Note: To gain access to control buttons, pry

up cover (use slot at bottom of cover)

Display shows: Range:

“-10ºF” -45ºF to 99ºF

1 2 3 4 5 6 7 8

Shrnutí obsahu

Strany 1 - REFRIGERATION

SmartVapTMElectronicallyControlled SystemModel: (Part # 1090200)Electrical Power: 115/1/60, 208-230/1/601079817PROGRAM SPECIFICATIONSAND OPERATINGINST

Strany 2

“Temp” Button FunctionsTo view TEMP settings (in sequence listed below), push and release the “Temp” button.To adjust settings, hold down the “Temp” b

Strany 3

- 3 -

Strany 4

- 4 -

Strany 5

- 5 -

Strany 6 - Troubleshooting Guide

Troubleshooting GuideWARNING: These guidelines are intended only for qualified service personnel familiar withtroubleshooting procedures and high volt

Strany 7 - Possible Solutions

ProblemRefrigeration cycle willnot start (Display OK andpowers up)Defrost heaters do not ener-gize (Display OK and powersup)Poor Refrigeration /Defros

Strany 8 - PROJECT INFORMATION

Due to National Refrigeration’s policy of continuous product improvement, we reserve the right to make changes without notice.metsySrebmuNledoM pU-tra

Komentáře k této Příručce

Žádné komentáře

Bally-refrigerated-boxes SmartVapElectronically Controlled System Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Ledničky Bally-refrigerated-boxes SmartVapElectronically Controlled System. Bally Refrigerated Boxes SmartVapElectronically Controlled System User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Ledničky Bally-refrigerated-boxes SmartVapElectronically Controlled System